Sterilization: the ethical and scientific basis of modern dentistry
The vision of Dr. Gema Maeso, specialist in periodontics and implantology
Sterilization is not a “technical phase” to be relegated to the background of the practice. It is a fundamental element of clinical quality, a process that, if really integrated into the operational routine, ceases to be simply a formality and becomes what it should really be: a guarantee of safety for the patient and for the dental team.
This vision emerged with particular clarity in a recent speech by Dr. Gema Maeso* at the Academia de Ciencias Odontológicas, which brought an essential principle back to the centre of the methodological debate: biosafety is not a secondary protocol, but the ethical and scientific basis of modern dentistry. Without this precondition, clinical practice – however technologically advanced – would lose its primary significance, and would fail to guarantee the patient the highest possible level of safety with regard to the risk of cross-infection.
Sterilization as clinical culture
A common misconception still persists: that sterilization is simply a set of rules to be followed, often out of fear of inspection, or simply convention and habit. But sterilization is not just a checklist, it is a culture that is built over time and is based on:
- method (a consistent and repeatable workflow),
- discipline (consistent rigour, not sporadic),
- monitoring (objective checks, not presumptions),
- traceability (ability to document and reconstruct).
When even one of these elements is missing, there is a risk that sterilization becomes a dangerous illusion of safety.
The risk of cross-infection
In dentistry, we work every day with instruments that come into contact with blood, saliva and tissue, creating aerosols and droplets. In this context, any flaw in reprocessing can turn into a genuine risk of cross-contamination: between patients, from patients to staff, or from the environment to the patient.
Sterilization, therefore, is not just a formality, but a real clinical guarantee. And like all guarantees, it must be backed by tests, procedures and checks.
This context reveals the dentist’s more profound role as a guardian of health: our mission of care is not limited to direct clinical intervention, but extends to all those “invisible” processes that ensure patient integrity. Caring, in fact, means protecting, and there is no protection without an impeccable biosafety protocol.
Two "breakthroughs" that have changed biosafety in the dental practice
The evolution of infection control practices over the years has been driven by historical events that have forced the profession to take a leap forward in awareness.
- 1980s – HIV
A turning point that transformed our approach to hygiene and protection, accelerating the adoption and evolution of sterilization systems in dental practices (in particular the increased use of autoclaves and the standardization of procedures). - 2020 – COVID-19
A more recent systemic shock that turned the spotlight back onto a subject that has often been taken for granted: the management of aerosols, surfaces, and environments, and the importance of repeated safe treatment combined with effective protection barriers.
Two different events, one message: biosafety is non-negotiable. Prevention works when it becomes routine: clear procedures, consistent behaviour, verifiable results.
The sterilization room as the invisible heart of the dental practice
Sterilization takes on a central role. An effective metaphor for sterilization is the “invisible, beating heart” of the practice. In other words, to quote Dr. Maeso:
“The sterilization room is the space where science meets ethics, where each autoclave cycle represents not only a technical protocol, but an act of responsibility and respect for the health of others. In this room, the professional is not seeking recognition, but safety. Their excellence does not come from what can be seen, but from the risk that they manage to prevent with quiet rigour. Cleanliness, traceability, biological and chemical controls, recording of each load and equipment maintenance constitute a language of their own, a veritable grammar of asepsis that underpins clinical practice. In the era of technological progress, the sterilization room should not be a marginal space, but a hub of innovation and continuous training, where excellence is measured in the absence of risk and in the trust that the patients place in our hands”.
There are three key concepts in the sterilization room:
1) Well-defined areas
The workflow must be clear from the layout, even before it is made clear by the protocol:
- “dirty” area (decontamination and washing),
- “clean” area (packaging, sterilization and output).
When the sequence is interrupted, the risk of recontamination increases, and process control and repeatability are compromised.
2) Use of PPE
The patient is not present in the sterilization room, but the risk of exposure to contaminated instruments and materials is real. For this reason, PPE and operating rules must maintain the same level of rigour as the clinical area.
3) Reproducible method
Safety does not come from intention, but from repeatability: clear procedures, appropriate instruments, defined roles, and checks. Repeatability is the guarantee that the patient’s health is not entrusted to chance, but to an organized and consistent system that aims to minimize any possible margin of error.
An interlinked process
Sterilization is a continuous process: if even one of the constituent steps is insufficient, it ceases to be effective. Sterilization cannot be “correct” if:
- the cleaning is incomplete,
- the disinfection is rudimentary,
- the instruments are not dried,
- the packaging is defective,
- the storage is inadequate.
That is why every step must be precise, rigorous, and standardized.
Cleaning is the first pillar, where devices that reduce manual handling come into play, increasing safety, effectiveness and standardization (e.g. thermodisinfectors, multifunction tanks).
Drying follows immediately after: an important phase because humidity can compromise the previous process and promote recontamination.
Packaging consists of creating and maintaining a sterile barrier: without proper packaging, sterility cannot be maintained over time.
Sterilization is a methodical process: choosing the correct cycle, water quality, adequate load, and periodic maintenance.
Safety, however, must be demonstrated: routine checks, indicators and tests are not optional extras, but an integral part of the process. Sterilization must also be accompanied by traceability: recording the data for each cycle is not bureaucracy, it is risk management. It makes the system robust, verifiable and improvable.
Finally, storage. Only meticulous and appropriate storage can preserve the sterility of the packaging, without compromising the entirety of the previously completed process. But this is not just storage, it is a commitment to ongoing patient safety.
Sterilization is the point at which clinical quality ceases to be an intention and becomes measurable. It is a system made up of methods, checks and traceability, which only works if each step is under control. In this sense, biosafety is not an abstract concept: is the most concrete way in which a practice can demonstrate its professionalism. In this sense, sterilization is also a profoundly human gesture.
It is the most concrete form of respect for the patient, especially because the patient never sees it. It is not seen, it is not mentioned, it is not “shown”, like technology or a clinical service. Yet, it is precisely here that a crucial aspect of the care relationship is played out. Dedicating time, resources and attention to the correct execution of the protocols, investing in continuous training, maintaining high standards even when the routine could be simplified, is an ethical stance. It means affirming that the safety of others comes before haste, habit and approximation.
Sterilization is therefore a silent responsibility. It’s the difference between “doing things” and doing them well, every day, even when no one is watching. It is a way of understanding our profession that recognizes an essential fact: clinical quality is not only what we do for the patient, but also what we prevent for the patient. And when prevention becomes a culture, the practice is simply not following a protocol. It is protecting the dignity of care, the safety of the group and the value of the trust that each patient puts in us. Therefore, to echo the words of Dr. Maeso, we can say that biosafety does not only protect health: “it protects trust”. It is the invisible base that supports every smile we treat, every regenerated tissue, and every patient who sits in our chair, with the certainty of being, first and foremost, protected.
This article is inspired by and drawn from Dr. Gema Maeso’s speech, entitled “Sterilization in Dentistry: innovation and professional responsibility “, from the occasion of her investiture ceremony for the prestigious title of Corresponding Academician of the Academia de Ciencias Odontológicas de España.
At Euronda we warmly celebrate this professional achievement that fills us with pride. This recognition confirms and rewards her clinical, educational and research career, and her constant commitment to excellence and safety in dental practice.
*Dr. Gema Maeso, a specialist in periodontics and implantology certified by the European Council in Periodontics (EFP) and the Spanish Academy of Dental Sciences.